Avalpa Community

hi

I use this commands
tsloop /root/OC3.demo.ts > myfirstfifo.ts &

then

tsrfsend myfirstfifo.ts 0 669500 7000 64 3/4 1/16 8 0 0
or
tsrfsend myfirstfifo.ts 0 698000 8000 16 7/8 1/32 8 0 0
but always have the same result
Open /dev/usb-it950x0 ok
g_ITEAPI_TxDeviceInit ok
1 Devices
g_ITEAPI_GetDrvInfo ok
DriverInfo.DriverVerion = v13.12.17.1
DriverInfo.APIVerion = 1.3.20131217.0
DriverInfo.FWVerionLink = 255.39.2.0
DriverInfo.FWVerionOFDM = 255.9.11.0
DriverInfo.Company = ITEtech
DriverInfo.SupportHWInfo = Eagle DVBT
DriverInfo.ProductID = 0x9507
Frequency = 698000 KHz
Bandwidth = 8000 MHz
Constellation: 16QAM
Code Rate: 7/8
Interval: 1/32
Transmission Mode: 8K
Channel Capacity is 21111930 bps
MinGain: -52, MaxGain: 6
packet_time 0, len 188, written 188, rewrite 0
packet_time 0, len 188, written 188, rewrite 1
packet_time 0, len 188, written 188, rewrite 2
packet_time 0, len 188, written 188, rewrite 3
packet_time 0, len 188, written 188, rewrite 4
packet_time 0, len 188, written 188, rewrite 5
packet_time 0, len 188, written 188, rewrite 6
packet_time 0, len 188, written 188, rewrite 7
packet_time 0, len 188, written 188, rewrite 8
packet_time 0, len 188, written 188, rewrite 9
send(): error : Success


what I am doing wrong?? can you help me?

hello, don't know what's wrong, actually..

it's really the simplest case.

can you try to reverse the two command.

can you print the dmesg entries about the Hides driver? just to check the version between kernel driver of dongle and tsrfsend (which package did you compile? what name ?)

bests

Andrea Venturi