t be reserved
[    0.384108] system 00:0c: iomem range 0xdfe5c800-0xdfefffff could not be reserved
[    0.384111] system 00:0c: iomem range 0xdff00000-0xdfffffff could not be reserved
[    0.384113] system 00:0c: iomem range 0xffe00000-0xffffffff could not be reserved
[    0.384116] system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved
[    0.384118] system 00:0c: iomem range 0xfec00000-0xfec0ffff could not be reserved
[    0.384121] system 00:0c: iomem range 0xfee00000-0xfee0ffff could not be reserved
[    0.384123] system 00:0c: iomem range 0xfed20000-0xfed8ffff could not be reserved
[    0.384126] system 00:0c: iomem range 0xfeda0000-0xfeda3fff could not be reserved
[    0.384128] system 00:0c: iomem range 0xfeda4000-0xfeda4fff could not be reserved
[    0.384131] system 00:0c: iomem range 0xfeda5000-0xfeda5fff could not be reserved
[    0.384133] system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved
[    0.384136] system 00:0c: iomem range 0xfed18000-0xfed1bfff could not be reserved
[    0.384138] system 00:0c: iomem range 0xf8000000-0xfbffffff could not be reserved
[    0.414476] PCI: Bridge: 0000:00:01.0
[    0.414479]   IO window: e000-efff
[    0.414482]   MEM window: 0xf6d00000-0xf6efffff
[    0.414485]   PREFETCH window: 0x00000000e0000000-0x00000000efffffff
[    0.414489] PCI: Bridge: 0000:00:1c.0
[    0.414490]   IO window: disabled.
[    0.414495]   MEM window: disabled.
[    0.414499]   PREFETCH window: disabled.
[    0.414506] PCI: Bridge: 0000:00:1c.1
[    0.414508]   IO window: disabled.
[    0.414513]   MEM window: 0xf6c00000-0xf6cfffff
[    0.414517]   PREFETCH window: disabled.
[    0.414524] PCI: Bridge: 0000:00:1c.3
[    0.414527]   IO window: d000-dfff
[    0.414533]   MEM window: 0xf6a00000-0xf6bfffff
[    0.414537]   PREFETCH window: 0x00000000f0000000-0x00000000f01fffff
[    0.414545] PCI: Bridge: 0000:00:1c.5
[    0.414546]   IO window: disabled.
[    0.414551]   MEM window: 0xf6900000-0xf69fffff
[    0.414555]   PREFETCH window: disabled.
[    0.414563] PCI: Bridge: 0000:00:1e.0
[    0.414564]   IO window: disabled.
[    0.414569]   MEM window: 0xf6800000-0xf68fffff
[    0.414574]   PREFETCH window: disabled.
[    0.414589] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.414593] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.414615] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.414621] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.414644] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[    0.414649] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.414672] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[    0.414677] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[    0.414700] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
[    0.414705] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[    0.414718] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.414740] NET: Registered protocol family 2
[    0.428084] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.428268] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.428597] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.428756] TCP: Hash tables configured (established 131072 bind 65536)
[    0.428758] TCP reno registered
[    0.436162] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[    0.504049] Switched to high resolution mode on CPU 0
[    0.637652]  it is
[    0.855407] Freeing initrd memory: 5715k freed
[    0.855542] Simple Boot Flag at 0x79 set to 0x1
[    0.619232] audit: initializing netlink socket (disabled)
[    0.619248] type=2000 audit(1217591439.856:1): initialized
[    0.619472] highmem bounce pool size: 64 pages
[    0.619475] Total HugeTLB memory allocated, 0
[    0.619546] VFS: Disk quotas dquot_6.5.1
[    0.619572] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.619647] io scheduler noop registered
[    0.619649] io scheduler anticipatory registered
[    0.619651] io scheduler deadline registered
[    0.619662] io scheduler cfq registered (default)
[    0.619794] pci 0000:01:00.0: Boot video device
[    0.619876] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.619907] assign_interrupt_mode Found MSI capability
[    0.619933] Allocate Port Service[0000:00:01.0:pcie00]
[    0.619964] Allocate Port Service[0000:00:01.0:pcie02]
[    0.619992] Allocate Port Service[0000:00:01.0:pcie03]
[    0.620074] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.620120] assign_interrupt_mode Found MSI capability
[    0.620165] Allocate Port Service[0000:00:1c.0:pcie00]
[    0.620196] Allocate Port Service[0000:00:1c.0:pcie02]
[    0.620224] Allocate Port Service[0000:00:1c.0:pcie03]
[    0.620319] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.620365] assign_interrupt_mode Found MSI capability
[    0.620409] Allocate Port Service[0000:00:1c.1:pcie00]
[    0.620439] Allocate Port Service[0000:00:1c.1:pcie02]
[    0.620468] Allocate Port Service[0000:00:1c.1:pcie03]
[    0.620563] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[    0.620609] assign_interrupt_mode Found MSI capability
[    0.620653] Allocate Port Service[0000:00:1c.3:pcie00]
[    0.620682] Allocate Port Service[0000:00:1c.3:pcie02]
[    0.620710] Allocate Port Service[0000:00:1c.3:pcie03]
[    0.620806] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[    0.620852] assign_interrupt_mode Found MSI capability
[    0.620897] Allocate Port Service[0000:00:1c.5:pcie00]
[    0.620927] Allocate Port Service[0000:00:1c.5:pcie02]
[    0.620956] Allocate Port Service[0000:00:1c.5:pcie03]
[    0.621236] isapnp: Scanning for PnP cards...
[    0.975098] isapnp: No Plug & Play device found
[    0.977085] hpet_resources: 0xfed00000 is busy
[    0.977148] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    0.978102] brd: module loaded
[    0.978172] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.985167] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.985171] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.985264] mice: PS/2 mouse device common for all mice
[    0.985302] cpuidle: using governor ladder
[    0.985304] cpuidle: using governor menu
[    0.985619] TCP cubic registered
[    0.985627] NET: Registered protocol family 1
[    0.985635] NET: Registered protocol family 17
[    0.985641] Using IPI No-Shortcut mode
[    0.985732] registered taskstats version 1
[    0.985938] Freeing unused kernel memory: 252k freed
[    0.988230] input: AT Translated Set 2 keyboard as /class/input/input0
[    1.287557] ACPI: SSDT DFE5D538, 0244 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
[    1.287877] ACPI: SSDT DFE5CECE, 05E5 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
[    1.288272] Monitor-Mwait will be used to enter C-1 state
[    1.288275] Monitor-Mwait will be used to enter C-2 state
[    1.288277] Monitor-Mwait will be used to enter C-3 state
[    1.288395] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    1.288433] ACPI: ACPI0007:00 is registered as cooling_device0
[    1.288437] ACPI: Processor [CPU0] (supports 8 throttling states)
[    1.288696] ACPI: SSDT DFE5D77C, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
[    1.288882] ACPI: SSDT DFE5D4B3, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
[    1.056617] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    1.056649] ACPI: ACPI0007:01 is registered as cooling_device1
[    1.056652] ACPI: Processor [CPU1] (supports 8 throttling states)
[    1.289650] Marking TSC unstable due to: TSC halts in idle.
[    1.062200] ACPI: LNXTHERM:01 is registered as thermal_zone0
[    1.064865] ACPI: Thermal Zone [THM] (35 C)
[    1.304303] usbcore: registered new interface driver usbfs
[    1.304326] usbcore: registered new interface driver hub
[    1.307909] usbcore: registered new device driver usb
[    1.308832] USB Universal Host Controller Interface driver v3.0
[    1.308882] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
[    1.308891] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[    1.308894] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.308986] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.309018] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
[    1.309121] usb usb1: configuration #1 chosen from 1 choice
[    1.309139] hub 1-0:1.0: USB hub found
[    1.309144] hub 1-0:1.0: 2 ports detected
[    1.609253] sdhci: Secure Digital Host Controller Interface driver
[    1.609255] sdhci: Copyright(c) Pierre Ossman
[    1.620087] No dock devices found.
[    1.634245] SCSI subsystem initialized
[    1.640795] libata version 3.00 loaded.
[    1.412202] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    1.412205] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.412207] usb usb1: Product: UHCI Host Controller
[    1.412209] usb usb1: Manufacturer: Linux 2.6.25-2-686 uhci_hcd
[    1.412211] usb usb1: SerialNumber: 0000:00:1a.0
[    1.412251] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[    1.412261] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[    1.412265] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.412290] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    1.412323] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
[    1.412418] usb usb2: configuration #1 chosen from 1 choice
[    1.412438] hub 2-0:1.0: USB hub found
[    1.412443] hub 2-0:1.0: 2 ports detected
[    1.515132] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.515135] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.515138] usb usb2: Product: UHCI Host Controller
[    1.515139] usb usb2: Manufacturer: Linux 2.6.25-2-686 uhci_hcd
[    1.515141] usb usb2: SerialNumber: 0000:00:1a.1
[    1.515174] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[    1.515183] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    1.515186] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.515211] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    1.515238] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
[    1.515327] usb usb3: configuration #1 chosen from 1 choice
[    1.515346] hub 3-0:1.0: USB hub found
[    1.515351] hub 3-0:1.0: 2 ports detected
[    1.621807] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.621809] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.621811] usb usb3: Product: UHCI Host Controller
[    1.621813] usb usb3: Manufacturer: Linux 2.6.25-2-686 uhci_hcd
[    1.621815] usb usb3: SerialNumber: 0000:00:1d.0
[    1.621838] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
[    1.621845] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    1.621848] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.621866] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[    1.621891] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
[    1.621973] usb usb4: configuration #1 chosen from 1 choice
[    1.621991] hub 4-0:1.0: USB hub found
[    1.621995] hub 4-0:1.0: 2 ports detected
[    1.886202] usb 1-1: new full speed USB device using uhci_hcd and address 2
[    1.728487] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.728489] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.728491] usb usb4: Product: UHCI Host Controller
[    1.728493] usb usb4: Manufacturer: Linux 2.6.25-2-686 uhci_hcd
[    1.728495] usb usb4: SerialNumber: 0000:00:1d.1
[    1.728520] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
[    1.728527] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    1.728531] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.728549] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[    1.728577] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[    1.728662] usb usb5: configuration #1 chosen from 1 choice
[    1.728680] hub 5-0:1.0: USB hub found
[    1.728685] hub 5-0:1.0: 2 ports detected
[    1.993677] Clocksource tsc unstable (delta = -306117138 ns)
[    2.051631] usb 1-1: configuration #1 chosen from 1 choice
[    1.827272] hub 1-1:1.0: USB hub found
[    1.829185] hub 1-1:1.0: 3 ports detected
[    1.835001] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.835003] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.835005] usb usb5: Product: UHCI Host Controller
[    1.835007] usb usb5: Manufacturer: Linux 2.6.25-2-686 uhci_hcd
[    1.835008] usb usb5: SerialNumber: 0000:00:1d.2
[    1.835082] tg3.c:v3.91 (April 18, 2008)
[    1.835115] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[    1.835126] PCI: Setting latency timer of device 0000:09:00.0 to 64
[    1.938072] usb 1-1: New USB device found, idVendor=0a5c, idProduct=4500
[    1.938075] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.938077] usb 1-1: Product: BCM2046B1
[    1.938078] usb 1-1: Manufacturer: Broadcom
[    2.197937] usb 3-1: new low speed USB device using uhci_hcd and address 2
[    2.288729] eth0: Tigon3 [partno(BCM95784M) rev 5784100 PHY(5784)] (PCI Express) 10/100/1000Base-T Ethernet 00:21:70:71:70:82
[    2.288733] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[    2.288735] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.486219] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 17 (level, low) -> IRQ 17
[    2.563896] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI version 1.10
[    2.370340] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 22)
[    2.370340] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 18
[    2.372730] mmc0: SDHCI at 0xf68ff500 irq 18 DMA
[    2.567068] ahci 0000:00:1f.2: version 3.0
[    2.567089] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[    2.374083] usb 3-1: configuration #1 chosen from 1 choice
[    2.376862] usb 3-1: New USB device found, idVendor=046d, idProduct=c03d
[    2.376864] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.376867] usb 3-1: Product: USB-PS/2 Optical Mouse
[    2.376868] usb 3-1: Manufacturer: Logitech
[    2.690114] mmc0: new SD card at address c6f4
[    2.499067] mmcblk0: mmc0:c6f4 SU02G 1985024KiB 
[    2.499100]  mmcblk0: p1
[    2.609206] usb 5-1: new full speed USB device using uhci_hcd and address 2
[    2.863846] firewire_core: created device fw0: GUID 424fc00037e3e470, S400
[    3.075499] usb 5-1: configuration #1 chosen from 1 choice
[    3.091630] usb 5-1: New USB device found, idVendor=0c45, idProduct=63fa
[    3.091632] usb 5-1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    3.091635] usb 5-1: Product: Laptop_Integrated_Webcam_2M
[    3.091636] usb 5-1: Manufacturer: SONiX Technology Inc.
[    3.091638] usb 5-1: SerialNumber: CN0TX613724878570GRK
[    3.292433] usb 1-1.1: new full speed USB device using uhci_hcd and address 3
[    3.404303] usb 1-1.1: configuration #1 chosen from 1 choice
[    3.405971] usb 1-1.1: New USB device found, idVendor=413c, idProduct=8157
[    3.405974] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.556007] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    3.556011] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
[    3.556016] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    3.556265] scsi0 : ahci
[    3.556346] scsi1 : ahci
[    3.556416] scsi2 : ahci
[    3.556627] ata1: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffb900 irq 218
[    3.556631] ata2: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffb980 irq 218
[    3.556634] ata3: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffba00 irq 218
[    3.609701] usb 1-1.2: new full speed USB device using uhci_hcd and address 4
[    3.531841] usb 1-1.2: configuration #1 chosen from 1 choice
[    3.534455] usb 1-1.2: New USB device found, idVendor=413c, idProduct=8158
[    3.534458] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.728890] usbcore: registered new interface driver hiddev
[    3.741521] input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
[    3.745089] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1
[    3.749255] input: HID 413c:8157 as /class/input/input2
[    3.749387] input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1a.0-1.1
[    3.753267] input: HID 413c:8158 as /class/input/input3
[    3.754088] input,hidraw2: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1a.0-1.2
[    3.754101] usbcore: registered new interface driver usbhid
[    3.754104] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[    3.836511] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.087427] ata1.00: ATA-8: WDC WD2500BEVS-75UST0, 01.01A01, max UDMA/133
[    4.087427] ata1.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32)
[    4.088223] ata1.00: configured for UDMA/133
[    4.370548] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.719476] ata2.00: ATAPI: Optiarc DVDRW/BDROM BC-5600S, 103B, max UDMA/100
[    4.874891] ata2.00: configured for UDMA/100
[    4.992545] ata3: SATA link down (SStatus 0 SControl 300)
[    5.183981] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVS-7 01.0 PQ: 0 ANSI: 5
[    5.184616] scsi 1:0:0:0: CD-ROM            Optiarc  DVDRWBD BC-5600S 103B PQ: 0 ANSI: 5
[    5.184616] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
[    5.184616] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[    5.184616] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    5.184616] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[    5.186093] ehci_hcd 0000:00:1a.7: debug port 1
[    5.186100] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[    5.186106] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[    5.200632] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    5.200728] usb usb6: configuration #1 chosen from 1 choice
[    5.200749] hub 6-0:1.0: USB hub found
[    5.200754] hub 6-0:1.0: 4 ports detected
[    5.014365] Driver 'sd' needs updating - please use bus_type methods
[    5.014426] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[    5.014439] sd 0:0:0:0: [sda] Write Protect is off
[    5.014441] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.014462] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.014508] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[    5.014520] sd 0:0:0:0: [sda] Write Protect is off
[    5.014522] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.014543] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.014546]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[    5.258583]  sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[    5.109820] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.299796] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.299799] Uniform CD-ROM driver Revision: 3.20
[    5.299842] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    5.302770] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[    5.302773] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.302775] usb usb6: Product: EHCI Host Controller
[    5.302777] usb usb6: Manufacturer: Linux 2.6.25-2-686 ehci_hcd
[    5.302779] usb usb6: SerialNumber: 0000:00:1a.7
[    5.302811] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[    5.302824] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    5.302828] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    5.302852] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[    5.306751] ehci_hcd 0000:00:1d.7: debug port 1
[    5.306758] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    5.306764] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[    5.125512] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.125530] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.318698] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    5.318830] usb usb7: configuration #1 chosen from 1 choice
[    5.318852] hub 7-0:1.0: USB hub found
[    5.318857] hub 7-0:1.0: 6 ports detected
[    5.418169] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    5.418172] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.418175] usb usb7: Product: EHCI Host Controller
[    5.418176] usb usb7: Manufacturer: Linux 2.6.25-2-686 ehci_hcd
[    5.418178] usb usb7: SerialNumber: 0000:00:1d.7
[    5.351793] hub 6-0:1.0: unable to enumerate USB device on port 1
[    5.351900] usb 1-1: USB disconnect, address 2
[    5.351902] usb 1-1.1: USB disconnect, address 3
[    5.355867] usb 1-1.2: USB disconnect, address 4
[    5.594448] usb 1-1: new full speed USB device using uhci_hcd and address 5
[    5.697346] kjournald starting.  Commit interval 5 seconds
[    5.697346] EXT3-fs: mounted filesystem with ordered data mode.
[    5.764218] usb 1-1: configuration #1 chosen from 1 choice
[    5.766105] hub 1-1:1.0: USB hub found
[    5.768005] hub 1-1:1.0: 3 ports detected
[    5.873876] usb 1-1: New USB device found, idVendor=0a5c, idProduct=4500
[    5.873878] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.873880] usb 1-1: Product: BCM2046B1
[    5.873882] usb 1-1: Manufacturer: Broadcom
[    5.873896] usb 3-1: USB disconnect, address 2
[    5.999959] usb 5-1: USB disconnect, address 2
[    6.304981] hub 7-0:1.0: unable to enumerate USB device on port 1
[    6.541305] usb 7-5: new high speed USB device using ehci_hcd and address 3
[    6.744348] usb 7-5: configuration #1 chosen from 1 choice
[    6.746888] usb 7-5: New USB device found, idVendor=0c45, idProduct=63fa
[    6.746888] usb 7-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    6.746888] usb 7-5: Product: Laptop_Integrated_Webcam_2M
[    6.746888] usb 7-5: Manufacturer: SONiX Technology Inc.
[    6.746888] usb 7-5: SerialNumber: CN0TX613724878570GRK
[    6.939813] usb 1-1.1: new full speed USB device using uhci_hcd and address 6
[    7.056562] usb 1-1.1: configuration #1 chosen from 1 choice
[    7.062635] input: HID 413c:8157 as /class/input/input4
[    7.062671] input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1a.0-1.1
[    7.062720] usb 1-1.1: New USB device found, idVendor=413c, idProduct=8157
[    7.062723] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    7.433113] usb 1-1.2: new full speed USB device using uhci_hcd and address 7
[    7.316163] udevd version 125 started
[    7.552657] usb 1-1.2: configuration #1 chosen from 1 choice
[    7.560789] input: HID 413c:8158 as /class/input/input5
[    7.586705] input,hidraw1: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1a.0-1.2
[    7.586768] usb 1-1.2: New USB device found, idVendor=413c, idProduct=8158
[    7.586770] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    7.844568] usb 3-1: new low speed USB device using uhci_hcd and address 3
[    8.021111] usb 3-1: configuration #1 chosen from 1 choice
[    8.035893] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    7.863376] input: Logitech USB-PS/2 Optical Mouse as /class/input/input6
[    7.923830] input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1
[    7.923893] usb 3-1: New USB device found, idVendor=046d, idProduct=c03d
[    7.923895] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    7.923897] usb 3-1: Product: USB-PS/2 Optical Mouse
[    7.923899] usb 3-1: Manufacturer: Logitech
[    8.239549] Linux agpgart interface v0.103
[    8.367265] ACPI: Battery Slot [BAT0] (battery present)
[    8.640131] ACPI: AC Adapter [AC] (on-line)
[    8.733698] input: Lid Switch as /class/input/input7
[    8.759790] ACPI: Lid Switch [LID]
[    8.759835] input: Power Button (CM) as /class/input/input8
[    8.820652] ACPI: Power Button (CM) [PBTN]
[    8.820706] input: Sleep Button (CM) as /class/input/input9
[    8.884668] ACPI: Sleep Button (CM) [SBTN]
[    8.710931] ACPI: WMI: Mapper loaded
[    8.771965] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
[    8.771984] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[    8.952488] ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 17
[    8.952509] PCI: Setting latency timer of device 0000:01:00.1 to 64
[    9.280338] input: Video Bus as /class/input/input10
[    9.328690] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    9.329215] input: Video Bus as /class/input/input11
[    9.392723] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
[    9.392853] input: Video Bus as /class/input/input12
[    9.452699] ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
[    9.399360] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
[    9.457460] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[    9.522205] Linux video capture interface: v2.00
[    9.600950] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63fa)
[    9.604794] input: Laptop_Integrated_Webcam_2M as /class/input/input13
[    9.623931] usbcore: registered new interface driver uvcvideo
[    9.623935] USB Video Class driver (v0.1.0)
[    9.885255] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    9.885294] rtc0: alarms up to one month, y3k
[    9.898541] input: PS/2 Mouse as /class/input/input14
[    9.970421] input: AlpsPS/2 ALPS GlidePoint as /class/input/input15
[    9.863701] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[    9.863735] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    9.863786] input: PC Speaker as /class/input/input16
[   11.433718] EXT3 FS on sda6, internal journal
[   12.179422] loop: module loaded
[   12.698255] kjournald starting.  Commit interval 5 seconds
[   12.698519] EXT3 FS on sda7, internal journal
[   12.698519] EXT3-fs: mounted filesystem with ordered data mode.
[   17.534809] tg3: eth0: Link is up at 1000 Mbps, full duplex.
[   17.534809] tg3: eth0: Flow control is on for TX and on for RX.
[   17.902717] NET: Registered protocol family 10
[   17.903166] lo: Disabled Privacy Extensions
[   18.901647] lp: driver loaded but no devices found
[   18.948125] ppdev: user-space parallel port driver
[   22.317183] Bluetooth: Core ver 2.11
[   22.317674] NET: Registered protocol family 31
[   22.317681] Bluetooth: HCI device and connection manager initialized
[   22.317686] Bluetooth: HCI socket layer initialized
[   22.577553] Bluetooth: L2CAP ver 2.9
[   22.577560] Bluetooth: L2CAP socket layer initialized
[   22.626080] usb 1-1.2: usbfs: process 3445 (hid2hci) did not claim interface 0 before use
[   22.644628] Bluetooth: RFCOMM socket layer initialized
[   22.644642] Bluetooth: RFCOMM TTY layer initialized
[   22.644645] Bluetooth: RFCOMM ver 1.8
[   22.730786] usb 1-1.3: new full speed USB device using uhci_hcd and address 8
[   23.056031] usb 1-1.3: configuration #1 chosen from 1 choice
[   23.056760] usb 1-1.3: New USB device found, idVendor=413c, idProduct=8156
[   23.056760] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   23.056760] usb 1-1.3: Product: Dell Wireless 370 Bluetooth Mini-card
[   23.056760] usb 1-1.3: Manufacturer: Dell Computer Corp
[   23.175798] Bluetooth: HCI USB driver ver 2.9
[   23.177878] usbcore: registered new interface driver hci_usb
[   36.900291] eth0: no IPv6 routers present
[   91.169534] CPU0 attaching NULL sched-domain.
[   91.169544] CPU1 attaching NULL sched-domain.
[   91.172273] CPU0 attaching sched-domain:
[   91.172280]  domain 0: span 03
[   91.172283]   groups: 01 02
[   91.172288] CPU1 attaching sched-domain:
[   91.172291]  domain 0: span 03
[   91.172293]   groups: 02 01
[  254.331189] udevd version 125 started
[  257.120085] usb 1-1.2: usbfs: process 4871 (hid2hci) did not claim interface 0 before use
[  257.947800] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  261.881761] tg3: eth0: Link is up at 1000 Mbps, full duplex.
[  261.881766] tg3: eth0: Flow control is on for TX and on for RX.
[  261.881992] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  278.681360] eth0: no IPv6 routers present
[ 6282.978910] hub 7-0:1.0: unable to enumerate USB device on port 2
[ 6283.380692] usb 3-2: new full speed USB device using uhci_hcd and address 4
[ 6283.542180] usb 3-2: configuration #1 chosen from 1 choice
[ 6283.543662] usb 3-2: New USB device found, idVendor=4348, idProduct=5523
[ 6283.543671] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 6283.543675] usb 3-2: Product: USB-SER!
[ 6283.616415] usbcore: registered new interface driver usbserial
[ 6283.616429] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[ 6283.616461] usbcore: registered new interface driver usbserial_generic
[ 6283.616463] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[ 6200.066053] drivers/usb/serial/usb-serial.c: USB Serial support registered for ch341-uart
[ 6200.066053] ch341 3-2:1.0: ch341-uart converter detected
[ 6283.630895] usb 3-2: ch341-uart converter now attached to ttyUSB0
[ 6283.630895] usbcore: registered new interface driver ch341
[ 6697.197272] usb 3-1: USB disconnect, address 3
[ 6618.607637] usb 7-1: new high speed USB device using ehci_hcd and address 5
[ 6702.467100] usb 7-1: configuration #1 chosen from 1 choice
[ 6702.468336] usb 7-1: New USB device found, idVendor=0ccd, idProduct=0038
[ 6702.468344] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6702.468348] usb 7-1: Product: Cinergy Tē
[ 6702.468351] usb 7-1: Manufacturer: TerraTec GmbH
[ 6702.590694] DVB: registering new adapter (TerraTec/qanu USB2.0 Highspeed DVB-T Receiver)
[ 6702.590898] input: TerraTec/qanu USB2.0 Highspeed DVB-T Receiver remote control as /class/input/input17
[ 6702.598062] usbcore: registered new interface driver cinergyT2
[ 6620.400887] hub 7-0:1.0: unable to enumerate USB device on port 3
[ 6620.638576] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 6704.535243] usb 4-1: configuration #1 chosen from 1 choice
[ 6620.827586] input: Logitech USB-PS/2 Optical Mouse as /class/input/input18
[ 6620.867101] input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1
[ 6620.867208] usb 4-1: New USB device found, idVendor=046d, idProduct=c03d
[ 6620.867215] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6620.867219] usb 4-1: Product: USB-PS/2 Optical Mouse
[ 6620.867221] usb 4-1: Manufacturer: Logitech